Calf Feeding - Gravity Milk Feeders

Calf Rearing doesn't get any wetter than this.....

Manufacturing mobile calf feeders since 1995
Only Polymaster calf feeders have all the features and benefits that make the Australian calf rearing job that much easier. All feeders are made in Victoria with all parts available ex-stock.

General features for mobiles:

  • Available with screw-on peach teats or cleanable poly teats
  • Fully hot dipped galvanised frame
  • Two manifolds, controlled by two valves
  • Screw-on teats can be replaced with blanks
  • Adjustable fold away jockey wheel
  • All parts accessible for thorough cleaning
  • Large wheels with sealed bearings
  • Built in backwash for all trailer units
  • Retractable drawbar

26 Teat Calf Feeding Trailer

Special Features:

  • 200 litre holding tank
  • 26 screw-on teats
  • 1 large filling lid
  • 405mm (16") wheels with sealed bearings
  • 2 x 25mm valves supply milk to manifolds

Feeding manifold able to be thoroughly cleaned


40, 50 and 60 Teat Trailer Models

Special Features:

  • 2 x large hinged filling lids
  • Floating level indicator
  • Sump drains to front of unit for bucket filling or easy cleaning
  • Large 450mm (18") wheels
  • 40mm draw off tap fitted
  • 400 or 800 litre tank


60 teat tandem rocker axle trailer with 800 litre tank.

60 teat tandem rocker axle trailer with 800 litre tank

50 teat Modular Feeder

Now!!
A mobile paddock feeding model with measured compartments for each calf. Fitted with the new poly teat and valve.

Special Features:

  • Self cleaning washing head in tank
  • Large hinged lids
  • Valves accessible from one end
  • Fully cleanable open top divisional or non divisional units
  • Only available with the popular "screw on/screw off" poly teat
  • Covers available for feeders

Feeder covers available
Fitted with the NEW Poly Teat & Retained Valve
20 Teat Divisional Feeder
Tube Feeders

Now, a 20 teat divisional free standing calf feeder making sure each calf gets its share.

Special Features:

  • 2.5 litres each division
  • Available with screw-on poly or peach teats
  • Easy access to all teats
  • Free standing unit - feeds 20 calves
  • Rigid galvanised stand
  • Splayed frame - resists tipping

Special Features:

  • Good for smaller herds
  • Economical & labour saving
  • Drainage bung for easy cleaning
  • Sealed unit with large access lid, teats connected to tubes
  • Standard with peach teats/ stallion teats optional

Fence Hung Gravity Feeders

Polymaster's complete range of calfaterias (milkmaid feeders) have been thoroughly tested and proven to efficiently feed calves from the first day through to weaning. A must for every calf rearer. Polymaster has the largest range of feeders, made in Victoria.

Special Features:

  • Available with cleanable stallion teats or peach teats
  • No narrow openings for milk to block
  • Generous teat spacing allows calves room to feed
  • UV stabilised poly for long outdoor use
  • 2.5 litres each division - MM5, MM8
  • 2.0 litres each division - MM12, MM13
  • Teat cap easily unscrews to wash out feeder
  • Adjustable galvanised hanging brackets to suit rail spacing
  • Translucent colour feeders - to see milk level

Dry Feeding

Special features:

  • Height of frame 600mm
  • Galvanised frames with splayed legs for greater stability
  • Poly trough liner - will not rust, very durable

Poly Cone Feeder

Special Features:

  • Full cover lid on rubber strap
  • Stable galvanised skid frame
  • Adjustable collar to vary feed flow
  • Designed for feeding calves in the paddock

Fence Pellet Feeder

Special Features:

  • Steel mounting brackets
  • Adjustable galvanised baffle to vary feed flow
  • Holds 40 kg
  • Available with lid

Available on all Calf Feeders from Polymaster. Through many years of trialling calf feeders and teats the NEW Poly Teat has emerged as the No. 1 leader in hygiene and longevity to be calf user friendly and economical.
Polymaster's screw on teats have made a real breakthrough in the field. Being able to clean a teat and feeder thoroughly is a must in an environment where bacteria thrives.

 

SCT
SCITP
Screw cap with internal thread for peach teat.
PCT / SC
Peach Teat and Cap.
The peach teat and cap is available
with all feeders or loose.

Features are:

  • All long lasting polyurethane
  • Will not absorb moisture or chemicals in comparison to natural rubber.
  • All teats compatible to Polymaster's screw-on feature.
  • Available with cap and valve if required.
  • Now even softer
  • Fully removable for thorough cleaning and storage
  • Can use with or without valve to adjust feeding rate
Continually improving models to make calf feeding more pleasurable.
Contact CRT Kyneton
©Steve Cselka 2006 - 2008