Mains Powered Energizers

A Gallagher SmartPower™ energizer is an invaluable fence management tool, enabling not only more power and performance, but improved, more cost-effective fence management through fence monitoring and remote communications technology.
To find out more about our complete Gallagher SmartPower™ range contact CRT Kyneton .

MX7500 Energizer (G37710)

  • 75 Joules of stored energy
  • Powers up to 160 km of multiwire fence
  • Features SmartPower adaptive output control technology that automatically adjusts to suit your fence conditions while minimising power consumption
  • Output voltage adjustable from 5 kV to 9 kV
  • Comes with integrated SmartPac remote control and fault finder
  • Stored energy, output voltage, fence voltage and earth voltage alarms give early notification of problems for improved fence management
  • Advanced lightning protection.
1.
On: Indicates normal operation
Standby: Indicates Standby Mode
Temperature: Indicates if the internal Temperature is too hot.
Service: Indicates hardware faults that stop the energizer operating correctly.
2.
Earth Terminal Green: Connects to earth
Reference Earth Terminal Black: Connects to reference earth.
Fence Terminal Blue: Connects to section of fence being monitored.
Output Terminal Red: Connects to fence
3.
Fence Monitoring System: Check the performance of your fence system at a glance. The display shows the load on your fence, condition of your earth system, and fence voltage, providing peace of mind that your fence is maintaining effective stock control.

PowerPlus is Gallagher's range of energizers that offer exceptional value and outstanding performance.

MR6000 Energizer (G37810)

  • 60 Joules of stored energy
  • Powers up to 140km of multi-wire permanent fence
  • Quickscan Output Voltage bar graph: shows output voltage of the energizer at a glance
  • Adaptive control automatically adjusts the output to suit your fence conditions, while minimising power consumption
  • SmartPac remote capable.

M1200 Energizer (G32810)

  • 12 Joules of stored energy
  • Powers up to 48km of multi-wire permanent fence
  • Quickscan Output Voltage bar graph: shows output voltage of the energizer at a glance.

M600 Energizer (G38110)

  • 6 Joules of stored energy
  • Powers up to 35km of multi-wire permanent fence
  • Quickscan Output Voltage bar graph: shows output voltage of the energizer at a glance.

M300 Energizer (G38011)

  • 3 Joules of stored energy
  • Powers up to 25km of multi-wire permanent fence
  • Quickscan Output Voltage bar graph: shows output voltage of the energizer at a glance
  • Replaces current M300 energizer.

BARGRAPH

The quickscan output voltage bar graph shows the energizer output voltage at a glance. If the bar graph is flashing only red then you know there is a problem. If it is flashing green then you know it's OK. Quick, easy and reassuring.

Each mains powered energizer has performance indicator lights, built-in lightning protection to help protect the energizer from extreme damage and RFI (Radio Frequency Interference) suppressed circuitry to reduce noise on radios and televisions.

B280 Energizer (G36600)

  • 2.8 Joules of stored energy
  • Powers up to 35 km of multiwire fencing
  • Built-in battery save features to extend the life of your battery
  • Easy to use 5-stage rotary dial to change energizer operating functions
  • Uses 12V deep cycle rechargeable battery eg. Marine type (battery not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery
  • Bar graph can be used to indicate battery capacity and output voltage.
  • Replaces current B260 energizer.

B180 Energizer (G36400)

  • 1.8 Joules of stored energy
  • Powers up to 25 km of multiwire fencing
  • Built-in battery save features to extend the life of your battery
  • Easy to use 5-stage rotary dial to change energizer operating functions
  • Uses 12V deep cycle rechargeable battery eg. Marine type (battery not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery
  • Bar graph can be used to indicate battery capacity and output voltage
  • Replaces current B160 energizer.

B80 Energizer (G36200)

  • 0.8 Joules of stored energy
  • Powers up to 12 km of multiwire fencing
  • Built-in battery save features to extend the life of your battery
  • Easy to use 3-stage rotary dial to change energizer operating functions
  • Uses 12V deep cycle rechargeable battery eg. Marine type (battery not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery
  • Bar graph can be used to indicate battery capacity and output voltage
  • Replaces current B75 energizer.

SmartPac (G50250)
(Comes with the MX7500 energizer)

  • Includes integrated fault finder functions for improved convenience
  • Current and voltage displays simultaneously in 'fault finding' mode for ease of use
  • Rechargeable battery means no more battery purchases
  • 'Inquire' function shows energizer displays on the SmartPac from anywhere on the fence so you can confirm the fence repair has returned the energizer operation to normal
  • Simple interface with three buttons — on / off / Inquire
  • SmartPac is able to communicate with nine different energizers.
Contact CRT Kyneton or CRT Seymour
©Steve Cselka 2006 - 2011